Hemodiafiltration: a synergy yet to be convincing / Hemodiafiltração: uma sinergia ainda não convincente

ABSTRACT The desperate attempt to improve mortality, morbidity, quality of life and patient-reported outcomes in patients on hemodialysis has led to multiple attempts to improve the different modes, frequencies, and durations of dialysis sessions in the last few decades. Nothing has been more appealing than the combination of diffusion and convection in the form of hemodiafiltration. Despite the concrete evidence of better clearance of middle weight molecules and better hemodynamic stability, tangible evidence to support the universal adoption is still at a distance. Survival benefits seen in selected groups who are likely to tolerate hemodiafiltration with better vascular access and with lower comorbid burden, need to be extended to real life dialysis patients who are older than the population studied and have significantly higher comorbid burden. Technical demands of initiation hemodiafiltration, the associated costs, and the incremental benefits targeted, along with patient-reported outcomes, need to be explored further before recommending hemodiafiltration as the mode of choice.

RESUMO A tentativa desesperada de melhorar a mortalidade, morbidade, qualidade de vida e desfechos relatados pelos pacientes em indivíduos em hemodiálise levou a diversas tentativas de aprimorar os diferentes modos, frequências e durações das sessões de diálise nas últimas décadas. Nada foi mais atrativo do que a combinação de difusão e convecção na forma de hemodiafiltração. Apesar das evidências concretas de melhor depuração de moléculas de peso médio e melhor estabilidade hemodinâmica, evidências tangíveis para apoiar a adoção universal ainda estão distantes. Os benefícios de sobrevida observados em grupos selecionados que provavelmente toleram a hemodiafiltração com melhor acesso vascular e com menor carga de comorbidades precisam ser estendidos aos pacientes reais em diálise, que são mais velhos do que a população estudada e apresentam uma carga de comorbidades significativamente maior. As exigências técnicas do início da hemodiafiltração, os custos associados e os benefícios incrementais almejados, juntamente com os desfechos relatados pelos pacientes, precisam ser melhor explorados antes de se recomendar a hemodiafiltração como o modo de escolha.

Development of chitosan based microencapsulated spray dried powder of tuna fish oil: oil load impact and oxidative stability / Desenvolvimento de pó microencapsulado por pulverização de óleo de atum à base de quitosana: impacto da carga de óleo e estabilidade oxidativa

Abstract The impact of fish oil concentration on the oxidative stability of microcapsules through the spray drying process using chitosan and maltodextrin as wall material was studied. Emulsions were prepared with different Tuna fish oil (TFO) content (TFO-10%, TFO20%, TF030% TF0-40%) while wall material concentration was kept constant. Microencapsulated powder resulting from emulsion prepared with high fish oil load have high moisture content, wettability, total oil and low encapsulation efficiency, hygroscopicity and bulk tapped density. Oxidative stability was evaluated periodically by placing microcapsules at room temperature. Microcapsules prepared with TFO-10% presented high oxidative stability in terms of peroxide value (2.94±0.04) and anisidine value (1.54±0.02) after 30 days of storage. It was concluded that optimal amounts of fish oil for microencapsulation are 10% and 20% using chitosan and maltodextrin that extended its shelf life during study period.

Resumo Foi estudado o impacto da concentração de óleo de peixe na estabilidade oxidativa de microcápsulas por meio do processo de secagem por atomização, utilizando quitosana e maltodextrina como material de parede. As emulsões foram preparadas com diferentes teores de óleo de atum (TFO) (TFO-10%, TFO20%, TF030% TF0-40%), enquanto a concentração de material de parede foi mantida constante. O pó microencapsulado resultante da emulsão preparada com alta carga de óleo de peixe tem alto teor de umidade, molhabilidade e óleo total e baixa eficiência de encapsulação, higroscopicidade e densidade extraída a granel. A estabilidade oxidativa foi avaliada periodicamente colocando microcápsulas à temperatura ambiente. As microcápsulas preparadas com TFO-10% apresentaram alta estabilidade oxidativa em termos de valor de peróxido (2,94 ± 0,04) e valor de anisidina (1,54 ± 0,02) após 30 dias de armazenamento. Concluiu-se que as quantidades ideais de óleo de peixe para microencapsulação são de 10% e 20% usando quitosana e maltodextrina que prolongaram sua vida útil durante o período de estudo.

Increased yield performance of mutation induced Soybean genotypes at varied agro-ecological conditions / Aumento no desempenho de rendimento de genótipos de soja induzidos por mutação em condições agroecológicas variadas

Abstract In soybean breeding program, continuous selection pressure on traits response to yield created a genetic bottleneck for improvements of soybean through hybridization breeding technique. Therefore an initiative was taken to developed high yielding soybean variety applying mutation breeding techniques at Plant Breeding Division, Bangladesh Institute of Nuclear Agriculture (BINA), Bangladesh. Locally available popular cultivar BARI Soybean-5 was used as a parent material and subjected to five different doses of Gamma ray using Co60. In respect to seed yield and yield attributing characters, twelve true breed mutants were selected from M4 generation. High values of heritability and genetic advance with high genotypic coefficient of variance (GCV) for plant height, branch number and pod number were considered as favorable attributes for soybean improvement that ensure expected yield. The mutant SBM-18 obtained from 250Gy provided stable yield performance at diversified environments. It provided maximum seed yield of 3056 kg ha-1 with highest number of pods plant-1 (56). The National Seed Board of Bangladesh (NSB) eventually approved SBM-18 and registered it as a new soybean variety named 'Binasoybean-5' for large-scale planting because of its superior stability in various agro-ecological zones and consistent yield performance.

Resumo No programa de melhoramento da soja, a pressão pela seleção contínua para a resposta das características de rendimento criou um gargalo genético para melhorias da soja por meio da técnica de melhoramento por hibridação. Portanto, foi desenvolvida uma variedade de soja de alto rendimento, aplicando técnicas de reprodução por mutação, na Divisão de Melhoramento de Plantas, no Instituto de Agricultura Nuclear de Bangladesh (BINA), em Bangladesh. A cultivar popular BARI Soybean-5, disponível localmente, foi usada como material original e submetida a cinco doses diferentes de raios gama usando Co60. Em relação ao rendimento de sementes e às características de atribuição de rendimento, 12 mutantes genuínos foram selecionados a partir da geração M4. Altos valores de herdabilidade e avanço genético com alto coeficiente de variância genotípico (GCV) para altura da planta, número de ramos e número de vagens foram considerados atributos favoráveis ​​ao melhoramento da soja, garantindo, assim, a produtividade esperada. O mutante SBM-18, obtido a partir de 250Gy, proporcionou desempenho de rendimento estável em ambientes diversificados e produtividade máxima de sementes de 3.056 kg ha-1 com o maior número de vagens planta-1 (56). O Conselho Nacional de Sementes de Bangladesh (NSB) finalmente aprovou o SBM-18 e o registrou como uma nova variedade de soja, chamada 'Binasoybean-5', para plantio em larga escala por causa de sua estabilidade superior em várias zonas agroecológicas e desempenho de rendimento consistente.

Effect of different thread configurations on hydrophilic implant stability. A split-mouth RCT

Abstract This split-mouth randomized controlled trial aimed to evaluate the primary and secondary stability of hybrid implants with different thread configurations and hydrophilic surfaces. Twenty patients with a partially edentulous maxilla were selected. These patients received two types of implants with the same hydrophilic surface: CTP group: Cylindrical-Tapered implant with perforating threads; CTH: Cylindrical-Tapered implant with hybrid threads configuration (perforating and condensing threads). The primary and secondary stability parameters were measured by insertion torque and resonance frequency analysis at the time of implant placement and 7, 28, 56, and 90 days after the surgical procedure. The paired t-test was used to compare the data on the implant's stability between the groups. The statistical analysis was performed with a confidence level set at 95%. It was found that the implants in the CTH group presented higher primary stability values ​​at the time of implant placement, due to the higher ISQ (63.61 ± 9.44 vs. 40.59 ±7.46) and insertion torque (36.92 ± 16.50 Ncm vs. 28.00 ± 14.40 Ncm), than the implants in the CTP group. The CTH group presented higher ISQ values ​​in all follow-up periods: 7 days (68.67 ± 7.60 vs. 41.55 ± 9.07), 28 days (68.61 ± 5.98 vs. 47.90 ±13.10), 56 days (74.09 ± 3.96 vs. 55.85 ± 13.18), and 90 days (75.45 ± 4.02 vs. 63.47 ± 6.92) after implant placement. Hybrid implants with perforating and condensing threads demonstrated greater stability than hybrid implants with only perforating threads.

Resumo O objetivo deste estudo controlado randomizado de boca dividida foi avaliar a estabilidade primária e secundária de implantes híbridos com diferentes configurações de rosca e superfícies hidrofílicas. Vinte pacientes com maxila parcialmente edêntula foram selecionados. Esses pacientes receberam dois tipos de implantes com a mesma superfície hidrofílica: Grupo CTP: Implante cilíndrico-cônico com roscas perfurantes; Grupo CTH: Implante cilíndrico-cônico com roscas perfurantes e condensadoras. Os parâmetros de estabilidade primária e secundária foram medidos por análise de torque de inserção e frequência de ressonância no momento da colocação do implante e 7, 28, 56 e 90 dias após o procedimento cirúrgico. O teste t-pareado foi utilizado para comparação dos dados de estabilidade entre os grupos. A análise estatística foi executada levando-se em consideração um nível de confiança de 95%. Constatou-se que os implantes do grupo CTH apresentaram maiores valores de estabilidade primária no momento da colocação do implante, devido ao maior ISQ (63.61 ± 9.44 vs. 40.59 ±7.46) e torque de inserção (36.92 ± 16.50 Ncm vs. 28.00 ± 14.40 Ncm), do que os implantes do grupo CTP. Implantes do grupo CTH apresentaram valores de ISQ superiores em todos os períodos de acompanhamento: 7 dias (68.67 ± 7.60 vs. 41.55 ± 9.07), 28 dias (68.61 ± 5.98 vs. 47.90 ±13.10), 56 dias (74.09 ± 3.96 vs. 55.85 ± 13.18) e 90 dias (75.45 ± 4.02 vs. 63.47 ± 6.92). Os implantes híbridos com roscas perfurantes e condensantes demonstraram maior estabilidade do que os implantes híbridos com apenas roscas perfurantes.

Development of chitosan based microencapsulated spray dried powder of tuna fish oil: oil load impact and oxidative stability

Abstract The impact of fish oil concentration on the oxidative stability of microcapsules through the spray drying process using chitosan and maltodextrin as wall material was studied. Emulsions were prepared with different Tuna fish oil (TFO) content (TFO-10%, TFO20%, TF030% TF0-40%) while wall material concentration was kept constant. Microencapsulated powder resulting from emulsion prepared with high fish oil load have high moisture content, wettability, total oil and low encapsulation efficiency, hygroscopicity and bulk tapped density. Oxidative stability was evaluated periodically by placing microcapsules at room temperature. Microcapsules prepared with TFO-10% presented high oxidative stability in terms of peroxide value (2.94±0.04) and anisidine value (1.54±0.02) after 30 days of storage. It was concluded that optimal amounts of fish oil for microencapsulation are 10% and 20% using chitosan and maltodextrin that extended its shelf life during study period.

Resumo Foi estudado o impacto da concentração de óleo de peixe na estabilidade oxidativa de microcápsulas por meio do processo de secagem por atomização, utilizando quitosana e maltodextrina como material de parede. As emulsões foram preparadas com diferentes teores de óleo de atum (TFO) (TFO-10%, TFO20%, TF030% TF0-40%), enquanto a concentração de material de parede foi mantida constante. O pó microencapsulado resultante da emulsão preparada com alta carga de óleo de peixe tem alto teor de umidade, molhabilidade e óleo total e baixa eficiência de encapsulação, higroscopicidade e densidade extraída a granel. A estabilidade oxidativa foi avaliada periodicamente colocando microcápsulas à temperatura ambiente. As microcápsulas preparadas com TFO-10% apresentaram alta estabilidade oxidativa em termos de valor de peróxido (2,94 ± 0,04) e valor de anisidina (1,54 ± 0,02) após 30 dias de armazenamento. Concluiu-se que as quantidades ideais de óleo de peixe para microencapsulação são de 10% e 20% usando quitosana e maltodextrina que prolongaram sua vida útil durante o período de estudo.

Increased yield performance of mutation induced Soybean genotypes at varied agro-ecological conditions

Abstract In soybean breeding program, continuous selection pressure on traits response to yield created a genetic bottleneck for improvements of soybean through hybridization breeding technique. Therefore an initiative was taken to developed high yielding soybean variety applying mutation breeding techniques at Plant Breeding Division, Bangladesh Institute of Nuclear Agriculture (BINA), Bangladesh. Locally available popular cultivar BARI Soybean-5 was used as a parent material and subjected to five different doses of Gamma ray using Co60. In respect to seed yield and yield attributing characters, twelve true breed mutants were selected from M4 generation. High values of heritability and genetic advance with high genotypic coefficient of variance (GCV) for plant height, branch number and pod number were considered as favorable attributes for soybean improvement that ensure expected yield. The mutant SBM-18 obtained from 250Gy provided stable yield performance at diversified environments. It provided maximum seed yield of 3056 kg ha-1 with highest number of pods plant-1 (56). The National Seed Board of Bangladesh (NSB) eventually approved SBM-18 and registered it as a new soybean variety named Binasoybean-5 for large-scale planting because of its superior stability in various agro-ecological zones and consistent yield performance.

Resumo No programa de melhoramento da soja, a pressão pela seleção contínua para a resposta das características de rendimento criou um gargalo genético para melhorias da soja por meio da técnica de melhoramento por hibridação. Portanto, foi desenvolvida uma variedade de soja de alto rendimento, aplicando técnicas de reprodução por mutação, na Divisão de Melhoramento de Plantas, no Instituto de Agricultura Nuclear de Bangladesh (BINA), em Bangladesh. A cultivar popular BARI Soybean-5, disponível localmente, foi usada como material original e submetida a cinco doses diferentes de raios gama usando Co60. Em relação ao rendimento de sementes e às características de atribuição de rendimento, 12 mutantes genuínos foram selecionados a partir da geração M4. Altos valores de herdabilidade e avanço genético com alto coeficiente de variância genotípico (GCV) para altura da planta, número de ramos e número de vagens foram considerados atributos favoráveis ao melhoramento da soja, garantindo, assim, a produtividade esperada. O mutante SBM-18, obtido a partir de 250Gy, proporcionou desempenho de rendimento estável em ambientes diversificados e produtividade máxima de sementes de 3.056 kg ha-1 com o maior número de vagens planta-1 (56). O Conselho Nacional de Sementes de Bangladesh (NSB) finalmente aprovou o SBM-18 e o registrou como uma nova variedade de soja, chamada Binasoybean-5, para plantio em larga escala por causa de sua estabilidade superior em várias zonas agroecológicas e desempenho de rendimento consistente.

Comparison of clinical efficacy and stability of Toric implantable collamer lens implantation in different orientations / 国际眼科杂志(Guoji Yanke Zazhi)

AIM: To compare the clinical efficacy, vault, and rotational stability of horizontal, oblique, and vertical implantation of Toric implantable collamer lens(TICL).METHODS: Retrospective cohort study. A total of 92 cases(120 eyes)who underwent TICL implantation from July 2018 to March 2022 and had regular follow-up for at least 1 a postoperatively(1 d, 1 wk, 1, 3, 6 mo, and 1 a)at Wuhan Bright Eye Hospital were collected. The patients were divided into three groups, with 34 cases(45 eyes)in horizontal implantation group, 25 cases(29 eyes)in oblique implantation group(29 cases), and 33 cases(46 eyes)in vertical implantation group. Uncorrected distance visual acuity(UDVA), corrected distance visual acuity(CDVA), diopters, vault, and rotation angle(deviation of the actual axis of TICL from the expected axis).RESULTS: All surgeries were uneventful, and there were no complications such as infection, secondary glaucoma, or cataract opacity. Safety and efficacy of the surgery: the CDVA of the three groups of patients was better than or equal to the preoperative CDVA at 1 a postoperatively, and there was no statistically significant differences in postoperative UDVA and CDVA of the three groups(P>0.05). The safety index at 1a postoperatively was 1.34±0.21, 1.34±0.17, and 1.31±0.18 for the horizontal, oblique, and vertical groups, respectively. The efficacy index was 1.26±0.21, 1.33±0.18, and 1.27±0.16 for the three groups, respectively, both with no statistically significant differences(P>0.05). Vault: there was a significant difference in postoperative vault among the three groups(P=0.003), with the vertical group having the lowest vault, followed by the horizontal group and the oblique group. The vaults at different follow-up time points within each group showed significant differences(P<0.001), and all decreased over time. Residual astigmatism: there was no significant difference in residual astigmatism among the three groups(P=0.130), but there were differences at different follow-up time points within each group(P<0.001). Rotation angle: no significant differences in rotation angle were observed among the three groups(P=0.135), but there were differences at different follow-up time points within each group(P<0.001).CONCLUSION: The implantation of TICL in different orientations has good safety and efficacy, the postoperative rotational stability is good, and the appropriate angle can be selected to implant TICL according to the clinical situation.

Effects of environmental stability and phycoperiphyton structure on the macroinvertebrate community of regulated Andean rivers / Efectos de la estabilidad ambiental y estructura del ficoperifiton en la comunidad de macroinvertebrados en ríos andinos regulados

Introduction: The variability in the structure of aquatic communities is frequently attributed to environmental changes; however, in stable environments such as regulated rivers, trophic interactions could be another key environmental factor determining the structure of these communities. These alterations could cause a greater growth of algae, and in turn, changes in the functional groups and in the composition of the macroinvertebrate community favoring the dominance of certain groups of organisms. Objective: To identify the effects of environmental variations and changes in the structure of the phycoperiphyton on the macroinvertebrate community of regulated Andean rivers. Methods: We analyzed environmental and biological data collected in quarterly samples carried out between 2010 and 2018 in two rivers of the Central Andes (Antioquia - Colombia), for a total of 27 samples. Sample collections used standardized methods. Different statistical models were used to establish spatial and temporal patterns of the environmental variables, of the abundance and/or density and diversity of phycoperiphyton and macroinvertebrates, as well as the trophic relationships that exists between them. Results: We found that regulated rivers present relatively little environmental variability. The environmental parameters with the greatest variation were temperature, turbidity, and orthophosphates; these last two were the abiotic variables with the greatest contribution to benthic instability. Conclusion: The presence of scraping and foraging macroinvertebrates was more affected by the stability of the phycoperiphyton density than by environmental variables, showing the importance of trophic interactions in regulated rivers and the bottom up control in these ecosystems.

Introducción: La variabilidad en la estructura de las comunidades acuáticas se atribuye frecuentemente a cambios ambientales, no obstante, en ambientes estables como ríos regulados, las interacciones tróficas podrían ser otro factor ambiental clave determinante de la estructura de estas comunidades. Estas alteraciones podrían provocar un mayor crecimiento de algas y, a su vez, cambios en los grupos funcionales y en la composición de la comunidad de macroinvertebrados favoreciendo la dominancia de determinados grupos de organismos. Objetivo: Identificar el efecto de los cambios ambientales y de la estructura del ficoperifiton sobre la comunidad de macroinvertebrados de ríos Andinos regulados. Métodos: Se analizaron datos ambientales y biológicos recolectados en muestreos trimestrales realizados entre 2010 y 2018 en dos ríos de los Andes Centrales (Antioquia - Colombia), para un total de 27 muestras. La recolección de muestras empleó métodos estandarizados. Se utilizaron diferentes modelos estadísticos para establecer patrones espaciales y temporales de las variables ambientales, de la abundancia y/o densidad y diversidad de ficoperifiton y de los macroinvertebrados, así como las relaciones tróficas que existen entre ellos. Resultados: Se encontró que los ríos regulados presentan relativamente poca variabilidad ambiental. Los parámetros ambientales con mayor variación fueron: temperatura, turbidez y ortofosfatos; las dos últimas variables abióticas fueron las que más aportaron a la inestabilidad bentónica. Conclusión: La presencia de macroinvertebrados raspadores y recolectores fue más afectada por la estabilidad de la densidad del ficoperifiton que por las variables ambientales, evidenciando la importancia de las interacciones tróficas en ríos regulados y el control bottoom up en estos ecosistemas.

Análisis In vitro de yesos dentales de alta resistencia y baja expansión disponibles en Perú / In vitro analysis of high resistance and low expansion dental plasters available in Peru

Objetivo. Comparar la dureza, estabilidad dimensional y resistencia a la compresión de los yesos dentales de alta resistencia y baja expansión disponibles en el Perú. Métodos. Se realizó un estudio descriptivo, observacional y transversal. Se confeccionaron muestras de forma cilíndrica (8) y rectangular (8), de siete yesos dentales de alta resistencia y baja expansión. Se evaluó la dureza utilizando el Durómetro Universal Identec, la estabilidad dimensional con un calibrador digital y la resistencia a compresión con la Máquina de Ensayo Universal. Para determinar si hay diferencia en cada una de estas propiedades se empleó el análisis de varianza, la prueba F y la prueba de Duncan. Además, se empleó la prueba de comparación de medias, t de Student, para evaluar si difieren con los valores de la ADA (Asociación Dental Americana). Resultados. La dureza, estabilidad dimen-sional y resistencia a la compresión promedio de los yesos dentales presentó diferencias significativas (p<0.05) entre cada uno con los promedios estándares establecidos por la ADA. Conclusiones. En relación resistencia a la compresión el 100% de los yesos analizados cumplen con los parámetros establecidos por la ADA, en relación estabilidad dimensional solo el 28.6% y el 100% no alcanzan los estándares de dureza promedio establecidos por la ADA.

Objective. To compare the hardness, dimensional stability, and compressive strength of high-strength, low-expansion dental plasters available in Peru, according to ADA criteria. Methods. A descriptive, observational and cross-sectional study was developed. A selection of 8 cylindrical-shaped samples and 8 rectangular- shaped ones, from seven high-resistance, low-expansion dental plasters were fabricated. The hardness was evaluated using the Identec Universal Durometer. Dimensional stability was evaluated with a digital caliper and compressive strength was evaluated with the Instron Universal Testing Machine. To determine if there is a difference in each of these properties, the analysis of variance, F test, and the Duncan's test were used. In addition, to assess whether these values differ from those of the ADA, the mean comparison test, student's t table, were used. Results. The hardness, dimensional stability and average compressive strength of the high-strength, low-expansion dental plasters showed that there are significant di-fferences (p<0.05) between each of the dental plasters and with the standard averages established by the American Dental Association. (ADA). Conclusions. 100% of the high-strength, low-expansion dental casts meet the parameters established by the ADA in terms of their compressive strength, only 28.6% of these comply with the ADA in terms of dimensional stability and that 100% of these do not meet the average hardness standards established by the ADA.

Antimicrobial effect of phytosphingosine in acrylic resin

Abstract This study evaluated color stability (CS), anti-adherence effect (AAE), and cell viability of microorganisms on acrylic resin (AR) surface, treated associated or not with sodium percarbonate (SP). AR specimens were prepared, and color analysis was performed before and after the treatments and the CS was calculated. For analysis of AAE, the samples were sterilized by radiation in a microwave oven. Then samples were randomly distributed: phosphate-buffered saline (PBS - control), 0.5% sodium hypochlorite (SH), phytosphingosine (PHS), and phytosphingosine + SP (PHS+Na2CO3). The specimens remained in contact with solutions for 30 minutes and were later contaminated by Candida albicans. Aliquots were seeded in Petri dishes with Sabouraud Dextrose agar and incubated at 37°C for 24 hours. After the incubation, the number of colonies was counted. The cell viability of adhered microorganisms on the AR was evaluated and 20 fields were observed under an epifluorescence microscope, and the percentage of adhered viable cells was calculated. Data were compared (One-way ANOVA, Tukey, p<.05). As for CS, PHS+ Na2CO3 (0.4±0.1) resulted in less change than PBS (0.9±0.2), similar to the other groups (SH [1.0±0.3)]; PHS [0.9±0.2)]). There was no difference for all tested solutions regarding the ability to avoid microorganism adherence (p>0.05), but PHS (11.2±4.1) resulted in a smaller area of adhered viable cells, statistically different from SH (18.2±7.6) and PBS (26.4±10.8). It was concluded that PHS resulted in lower adhered viable cells and when associated with Na2CO3, also shows a lower effect on the CS of AR.

Resumo Este estudo avaliou estabilidade de cor (EC), efeito antiaderente (EAA) e viabilidade celular de microrganismos em superfície de resina acrílica (RA), tratada com solução de fitoesfingosina, associada ou não ao percarbonato de sódio (PS). Espécimes RA foram preparados e análise de cor foi realizada antes e após os tratamentos e EC foi calculada. Para análise de EAA, as amostras foram esterilizadas por radiação em forno de micro-ondas. Então foram distribuídas aleatoriamente: solução salina tamponada com fosfato (PBS - controle), hipoclorito de sódio 0,5% (SH), fitoesfingosina (PHS) e fitoesfingosina + SP (PHS+Na2CO3). Os espécimes permaneceram em contato com as soluções por 30 minutos e posteriormente foram contaminados por Candida albicans. Alíquotas foram semeadas em placas de Petri com ágar Sabouraud Dextrose e incubadas a 37°C por 24 horas. Após a incubação, o número de colônias foi contado. A viabilidade celular dos microorganismos aderidos na RA foi avaliada e 20 campos foram observados em microscópio de epifluorescência, e a porcentagem de células viáveis aderidas foi calculada. Os dados foram comparados (One-way ANOVA, Tukey, p<0,05). Quanto a EC, o PHS+ Na2CO3 [0,4 (0,1)] resultou em menor alteração que o PBS [0,9 (0,2)], semelhante aos demais grupos (SH [1,0 (0,3)]; PHS [0,9 (0,2)]). Não houve diferença para todas as soluções testadas quanto à capacidade de evitar a aderência de microorganismos (p>0,05), mas o PHS [11,2 (4,1)] resultou em uma área menor de células viáveis aderidas, estatisticamente diferente do SH [18,2 (7,6)] e PBS [26,4 (10,8)]. Concluiu-se que o PHS resultou em menor número de células viáveis aderidas e, quando associado ao Na2CO3, também apresenta menor efeito sobre o EC da RA.

Novel custom designed toric piggyback intraocular lens for the correction of residual postoperative astigmatism

We report the outcomes of a custom-designed toric piggyback intraocular lens in a patient with high postoperative residual astigmatism. A 60-year-old male patient underwent customized toric piggyback IOL for postoperative residual astigmatism of 13 D, with follow-up examinations for IOL stability and refractive outcomes. The refractive error stabilized at two months and remained stable at one year, with a correction of nearly 9 D of astigmatism. The IOP remained within normal limits, and there were no postoperative complications. The IOL remained stable in the horizontal position. To our knowledge, this is the first case report of correction of unusually high astigmatism by a novel smart toric design of piggyback IOL.

Stability Study of Pashanbhedadi Churna Used in Treatment of Ashmari (Renal Calculi): with Respect to Baseline Microbial Diagnostic Modalities

Ashmari (Renal Calculi) is most common disease of urinary system. Ashmari or calculus looks like small gravels/stones hence they are termed as Ashmari. For the treatment of Ashmari Pashanbhedadi Churna was taken as a trial drug. As Pashanbhedadi Churna was trial drug it was necessary to check the stability. Stability of the drug is the time period from the drug production until the time it is intended to be consumed. So, present study was carried out to know the stability of Pashanbhedadi Churna and to check microbial contamination in the Pashanbhedadi Churna at different time interval. Pashanbhedadi Churna was stored in plastic bag. Microbial study of the drug was done at different climatic conditions, humidity and temperature set ups with regular intervals for a period of 11months to analyse mycological and bacteriological findings by wet mount preparation and Gram stain test respectively. Though in different climate, temperature and humidity conditions, at the end of microbial study, Churna has shown absence of microbes for approx.11 months of preparation of drug. So, it is showed that drug is stable in minimum 32°C temperature to maximum 38°C and minimum humidity 23% to maximum 74% humidity. That means stability duration of drug after preparation is approx. 11 months which showed that drug was in a standard condition. Hence it is concluded that stability test of Pashanbhedadi Churna with respect to microbiological findings was negative at room temperature, warm and cold, dry and humid conditions.

Evaluation of Quality Characteristics and Storage Stability of Peanut Beverage Added Ginger, Moringa Leaf Powder and Lime

Peanut seeds were roasted at 800C for 20 min milled and blended with ginger (GI),with moringa leaf powder (MP), with lime (LI) with moringa leaf powder and ginger (MG) with lime and moringa leaf powder (LM) with lime and ginger (LM) into paste. Heated water (at 800C) was added to the paste while stirring for 30 min. The mixture was further heated in a boiling bath and filtered with muslin cloth cooled to obtain a drink which was flavored with pineapple, banana and milk flavor and sucrose was also added. The results showed moisture content of GI ranged from 79.87 – 83.95 %, with sample LI having the highest value was not significantly different () from MO, MG, LM and LG but sample GI having the lowest value, which was significantly () difference form LI, MG and LG. The ash content ranged from 1.92 – 2.41 %, with sample GI having the highest value which was significantly () different from LI and MG but not significantly () different from other samples. The crude fat content ranged from 2.92 -3.07 %, of which sample GI having the highest value and sample LI having the lowest value which are not significantly () different from one another. The crude protein ranged from 4.01 – 4.74 % of which sample GI having the highest value and sample LG having the least value which are not significantly () different from one another. The carbohydrate contents ranged from 3.49 – 6.49 % with sample LI had the highest value which was not significantly () different from sample GI and MO and sample MG having the lowest value which was significantly () difference from other sample except LG. pH of beverages decreased from 7.90 MG week 1 to 3.21 in LM in week 3.Total titretable acidity present in the beverages were GI in week 1; (0.13), MO(0.17), LI(0.18), MG(0.12), LM(0.19) and LG(0.16).At week 3, GI(0.18), MO(0.23), LI(O.24), MG(0.82), LM(0.24) and LG(0.24). The beverages contained low number of total plate counts (1.9 x 102 - 2.8 x 104) and fungi/yeasts counts (1.2 x 104- 4.2 X 106). Overall acceptability was high for all samples.

The effect of Phytosphingosine and bioactive glass-ceramics in preventing dental enamel erosion

Abstract This study evaluated the effect of phytosphingosine (PHS) and bioactive glass-ceramic (Biosilicate) on dental enamel in terms of color alteration (ΔE), microhardness, and surface roughness when submitted to erosive challenge (EC). Sixty specimens of bovine teeth (6×6×2mm) were obtained. Initial color (Easyshade, VITA), KHN (HMV-2, Shimadzu), and Ra (SJ-201P, Mitutoyo) measurements were performed. Specimens were separated into groups according to treatments: PHS, 10% Biosilicate, PHS+10% Biosilicate, and artificial saliva (control) and submitted to EC with Coca-Cola for 2 min. This cycle was repeated 4 times daily/15 days. Between cycles, specimens remained in artificial saliva (2 h/37°C). After daily cycles, they were also stored in artificial saliva at 37ºC. Final color, microhardness, and surface roughness measurements were done. Color and KHN data were analyzed by one-way ANOVA, Tukey's test; and Ra, by 2-way ANOVA, repeated measures, and Tukey's test (p<.05). The highest ΔE occurred in Saliva+EC (p<.05). Groups treated with PHS presented lower color change than Saliva+EC (p<.05). All the groups presented mean values above the 50:50% perceptibility (50:50%PT) and acceptability (50:50%AT) thresholds, except for control that showed mean value above 50:50%PT but below 50:50%AT. Biosilicate+EC showed higher relative microhardness than Saliva+EC (p<.05), but was similar to PHS+EC and PHS+Biosilicate+EC. Final enamel surface roughness increased for all the groups (p<.05), except for the control. The Biosilicate may prevent enamel mineral loss induced by erosion better than saliva. The PHS associated or not to Biosilicate demonstrated better color stability than saliva.

Resumo Este estudo avaliou o efeito da Fitoesfingosina (PHS) e da vitrocerâmica bioativa (Biosilicato) sobre o esmalte dental em termos de alteração de cor (ΔE), microdureza (KHN) e rugosidade superficial, quando submetido a desafio erosivo (DE). Sessenta espécimes de dentes bovinos (6×6×2mm) foram obtidos. Foram realizadas leituras de cor inicial (Easyshade, VITA), microdureza (HMV-2, Shimadzu) e rugosidade superfícial (SJ-201P, Mitutoyo). Os espécimes foram separados em grupos de acordo com os tratamentos: PHS, Biosilicato a 10%, PHS+Biosilicato a 10%, e saliva artificial (controle). Em seguida, foram submetidos a DE com Coca-Cola por 2 min. Esse ciclo foi repetido 4 vezes/dia por 15 dias. Entre os ciclos, as amostras foram mantidas em saliva artificial (2 h/37°C). Após os ciclos diários, os espécimes também foram armazenados em saliva artificial a 37ºC. Foram realizadas leituras finais de cor, microdureza e rugosidade superficial. Os dados de cor e microdureza foram analisados ​​por ANOVA de uma via, teste de Tukey; e dados de rugosidade superficial, por ANOVA de duas vias, teste de Tukey (p<.05). A maior ΔE ocorreu em Saliva+DE (p<.05). Grupos tratados com PHS apresentaram menor alteração de cor do que Saliva+DE (p<.05). Biosilicate+DE demonstrou valores intermediários, similar (p>.05) aos outros grupos, exceto Saliva+DE. Todos os grupos presentaram média acima dos limites 50:50% de perceptibilidade (50:50%LP) e aceitabilidade (50:50%LA) exceto o controle que demonstrou média acima do 50:50%LA mas abaixo do 50:50%LP. Biosilicate+DE mostrou maior microdureza realativa do que Saliva+DE (p<.05), mas similar a PHS+DE e PHS+Biosilicato+DE. A rugosidade de superfície do esmalte aumentou para todos os grupos, exceto para o controle que presentou a menor alteração (p<.05). O Biosilicato apode prevenir perda mineral do esmalte indizido pela erosão melhor que a saliva. O PHS associado ou não ao Biosilicato demonstrou melhor estabilidade de cor que a saliva.

Estabilidade de cor de diferentes sistemas cerâmicos fresados no CAD/CAM e polidos com diferentes métodos / Color stability of different ceramic systems milled in CAD/CAM and polished with different methods

A descoloração ou perda de translucidez dos materiais cerâmicos usados em odontologia ainda hoje é um problema, especialmente pelo comprometimento estético. Com o objetivo de comparar a estabilidade de cor, blocos de dissilicato de lítio (IPS e.max CAD HT) e de silicato de lítio reforçado com zircônia (Vita Suprinity HT) fresados no desenho de um disco com dimensões de 1,5 × 7 × 12 mm3 (n = 120) foram preparados usando 3 procedimentos de acabamento de superfície: glaze, polimento mecânico e coloração externa e glaze. Em seguida, cada grupo foi dividido em 2 subgrupos de armazenamento, chá preto e café (n = 10/grupo). As mensurações de cor foram medidas com espectrofotômetro (VITA Easyshade) no estágio inicial e após 1 semana, 2 semanas, 1 mês, 2 meses de armazenamento. As alterações de cor (ΔE) foram calculadas e analisadas estatisticamente usando ANOVA (α < 0,05). Observamos que, para ambos os materiais cerâmicos, o procedimento de glaze apresentou valores de mudança de cor estatisticamente menores do que os outros grupos (p < 0,05) após o armazenamento em ambas as bebidas. Os grupos de dissilicato de lítio apresentaram valores de alteração de cor estatisticamente menores em relação aos grupos de silicato de lítio reforçados com zircônia. Conclui-se que, o glaze sozinho levou a uma maior estabilidade de cor em relação ao polimento mecânico e coloração externa o dissilicato de lítio apresentou maior estabilidade de cor em comparação com o silicato de lítio reforçada com zircônia.

The discoloration or loss of translucency of ceramic materials used in dentistry is still a problem today, especially due to aesthetic compromise. In order to compare color stability, lithium disilicate (IPS e.max CAD HT) and zirconia-reinforced lithium silicate (Vita Suprinity HT) blocks were milled into a disc design with dimensions of 1.5 × 7 × 12 mm3 (n = 120). The specimens were prepared using 3 surface finishing procedures: glaze, mechanical polishing and external staining and glaze. Then, each group was divided into 2 storage subgroups, black tea and coffee (n = 10/group). Color measurements were measured with a spectrophotometer (VITA Easyshade) at the initial stage and after 1 week, 2 weeks, 1 month, 2 months of storage. Color changes (ΔE) were calculated and statistically analyzed using ANOVA (α < 0.05). We observed that, for both ceramic materials, the glaze procedure presented statistically lower color change values ​​than the other groups (p < 0.05) after storage in both beverages. The lithium disilicate groups showed statistically lower color change values ​​than the zirconia-reinforced lithium silicate groups. It is concluded that, glaze alone led to greater color stability compared to mechanical polishing and external staining, lithium disilicate showed greater color stability compared to zirconia-reinforced lithium silicate.

Accuracy and stability of a smart wearable device for quantitative analysis of environmental risks related to myopia / 中华实验眼科杂志

Objective:To evaluate the accuracy and stability of Eye-Monitor, a smart wearable device, in quantifying environmental risks related to myopia.Methods:A diagnostic test study was conducted.Forty-two subjects aged 18-25 years old were recruited from Shandong University of Traditional Chinese Medicine in December 2021.Forty-two Eye-Monitors were selected from 80 devices using the simple random sampling method.Static and dynamic tests were carried out to compare environmental risks related to myopia.The static tests included measurements under different working distances, different head tilt angles when sitting, and different light intensities.The dynamic tests included measurements under different near-work time, different outdoor activity time, different time watching computers, and different phone viewing time.Eye-Monitor with the largest sum of absolute values of total relative error was selected, Spearman rank correlation analysis was used to analyze the correlation between the set values and Eye-Monitor measurements, and the accuracy of the objectively measured values was evaluated by Bland-Altman consistency analysis.The stability of the objectively measured values from Eye-Monitor was evaluated by the coefficient of variation.This study adhered to the Declaration of Helsinki.The study protocol was approved by the Ethics Committee of the Affiliated Eye Hospital of Shandong University of Traditional Chinese Medicine (No.HEC-KS-2021005KY). Written informed consent was obtained from each subject.Results:There were significant correlations between the measured values and setting values in the working distance, head tilt angle when sitting, indoor light intensity, total near-work time, average continuous near-work time, outdoor activity time, time watching computers, and time viewing phones ( rs=0.999, 0.998, 0.999, 0.998, 0.976, 0.959, 0.992, 0.997; all at P<0.001), with the 95% limits of agreement (LoA) of-1.23-2.32 cm, -1.49-4.24°, -13.90-26.90 lx, -6.46-0.11 minutes, -4.50-1.20 minutes, -4.01-1.34 minutes, -2.54-1.94 minutes and-2.15-0.45 minutes, respectively.More than 95% of dots were within the clinically acceptable LoA.The coefficients of variation of the measured values ranged from 1.23%-2.99%, 2.39%-8.25%, 0.87%-8.03%, 1.49%-12.52%, 6.63%-13.59%, 0.00%-14.15%, 1.20%-8.33 and 1.49%-12.51%, respectively, showing good stability.Eye-Monitor had good accuracy in measuring outdoor light intensity (95% LoA: -336.50-130.00 lx). Conclusions:The smart wearable device Eye-Monitor can be used to objectively monitor working distance, head tilt angle when sitting, indoor light intensity, total near-work time, average continuous near-work time, outdoor activity time, time watching computers, and time watching phones, which are with good accuracy and stability.

Preliminary pre-prescription study of tetrodotoxin / 药学实践杂志

Objective To investigate the solubility and stability of Tetrodotoxin (TTX) in different solvents, and the effect of temperature and pH on its stability. Methods Solutions of TTX in different matrices were prepared. Their concentrations at different temperatures and pH buffers were determined by high performance liquid chromatography and their solubility and stability were analyzed and calculated. Results TTX was most soluble at pH 3.5 and its solubility decreased as the pH increased. TTX degraded most rapidly under strong alkali conditions, with complete degradation after 20 min of reaction at 0.1 mol/L sodium hydroxide and 70 ℃. The stability test results similarly demonstrated that TTX was least stable under alkaline conditions. In a PBS buffered solution at 37 ℃, pH 7.4, TTX concentration began to decrease consistently at 1~10h, with a degradation rate of 88.07±0.27% after 28 days. Conclusion TTX is readily soluble in acidic aqueous solutions at pH 3.5 and almost insoluble in alkaline aqueous solutions. Its stability is closely related to the temperature and pH of the medium. It is more stable in acidic aqueous solutions and easily degrades under alkaline conditions, and its degradation process could be accelerated by increasing temperature.

Effects of Delay in Tumor-Immune System on Stability / 医用生物力学

Objective To study stability of the deterministic tumor-immune system with time delay by means of linear stability analysis method. Methods In tumor-immune system, since it took some time for immune cells to recognize tumor cells and respond appropriately, time delay was considered in this process, then the model was simplified by using Taylor expansion of small delay, and the equilibrium points were solved out. By linear stability analysis method, the stability of these equilibrium points was studied. Finally, the trajectory of the system and that around each equilibrium point were simulated by numerical calculation method, so as to verify the result of theoretical analysis. Results The system had four meaningful equilibrium points with small delay, including a stable focus, a stable node, and two saddles. Moreover, the type and stability of these equilibrium points were not affected by the delay. Numerical simulation demonstrated the conclusion from theoretical analysis. Conclusions Under the condition of small delay, the type and stability of equilibrium points in the system are notaffected by the delay. The results are helpful to further understand dynamic mechanisms of tumor immune response, and provide references for tumor growth and treatment

Adaptability and genetic stability of hepatitis A virus SYX_1 strain in human diploid cell MRC-5 / 中国生物制品学杂志

@#Abstract：Objective To investigate the adaptability and genetic stability of hepatitis A virus（HAV）SYX1 strain in human diploid cell MRC⁃5. Methods HAV SYX1 strain isolated from feces of patients with hepatitis A was continuously propagated in MRC⁃5 cells for 28 passages，of which the 1st ~ 26th passages were determined for antigen contents and virus titers，the 6th passage was observed for the morphology under microscope and detected for physicochemical properties，and the 13th ~ 15th passages were studied for virus proliferation dynamics to determine the peak yield of virus proliferation. Genomic RNA was extracted from the 8th，12th，18th，20th，22nd，25th，26th and 28th passages and sequenced to analyze the genetic stability. The main seed batch and working seed batch of HAV SYX1 strain were established and verified according to the requirements of Chinese Pharmacopoeia（VolumeⅢ，2020 edition）. Results The antigen content of HAV SYX1 was stable at 160 ~ 320 EU／mL and the titer was maintained at 7. 3 ~ 8. 3 lgCCID50／mL after the 8th passages in MRC 5 cells；Virus particles showed two types：hollow and solid，with a diameter of 27 ~ 32 nm，spherical，without envelope and protrusions on the surface，which tolerated low pH value and ether. The peak period of virus proliferation was 10 d with an antigen content of more than 160 EU／mL and a virus titer of more than 7. 0 lgCCID50／mL. HAV SYX1 was a subtype of HAV IB，and no mutation in the coding region of all structural proteins during passage was observed. The verification results of main seed batch and working seed batch of HAV all met the relevant requirements. Conclusion HAV SYX1 strain showed good adapt⁃ ability and genetic stability in MRC⁃5，which might be used for the development and production of inactivated hepatitis A vaccine.

Thermal stability of neuraminidase in influenza vaccine / 中国生物制品学杂志

@#Abstract：Objective To analyze the stabilities of neuraminidase（NA）in influenza vaccine at different temperatures and provide a reference for further complete understanding of overall shelf life of vaccines. Methods Monovalent bulks of influenza H1N1，H3N2 and B vaccines were stored at 4（low temperature），25（room temperature）and 37 ℃（changed temperature）for 0. 5，2，7，24 and 48 h separately，using that at 100 ℃（extreme temperature）for 1 h as control，and determined for NA activity by enzyme⁃linked lectin method. Results The NA activities of influenza H1N1 vaccines stored at 25 and 37 ℃ decreased significantly with the increasing of time. No significant decreases were observed in H3N2 and B vaccines even after storage at two non⁃storage temperatures for 48 h. However，all the NA activities of three vaccines decreased at 100 ℃. Conclusion Both H3N2 and B vaccines showed high stability at abnormal storage temperatures not more than 37 ℃，while H1N1 vaccine was relatively sensitive to the temperature for storage.